How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique procedure to add a second key. It requires dealer support using an electronic handheld computer called Tech-2. Then, a new transponder and key are required to be purchased.
It is an excellent idea to rotate your keys in order that one does not get worn out more quickly than the other. This will help keep your keys in pristine condition.
Replacement Case
As opposed to the traditional Saab keys of old keys, the new key fobs are equipped with electronics which makes it hard to copy. This has made car theft much more difficult than it was twenty years ago. However, it also has made the replacement of lost keys a more expensive endeavor.
Saab 9-3 owners should have two working keys. If one is lost it costs a lot of money to replace it in the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers typically charge between $100 and $200 to do this.
There are some ways around these expensive. Some parts providers will use the code of the spare key to cut a brand new metal blade for less than the cost of the dealer. The key must, however, be the same as the original to work correctly in your car.
Follow these steps to replace the case. You will need to have a flathead and a lot of patience. With the screwdriver, pry apart the plastic, and then take off the emergency key. After saab 9-5 key replacement is open take out all electronic components and put them back in the new case. Make sure you insert the correct key and badge into the case.
Replacement Battery
The Saab 9-3 replacement battery is a budget component that can be quickly and easily replaced. This video tutorial on DIY from YouTube Cyclone Cyd shows how to replace the battery for the remote key fob in just four steps. This tutorial is compatible with any modern Saab key fob. However, the procedure may differ slightly.
The first step is to locate the button that releases the backup key on the fob. The button is usually found on the back of the fob, right next to the Saab Logo. Next use a flathead screwdriver into the small hole of this button. This should be enough to open the case of the fob to allow you to replace the battery.
After you have installed the new battery CR1632, you are able to restore your remote key fob. Then, you can program it into your car. The procedure should take no more than an hour, if not less. It is a very simple process that does not require any special equipment.
If you lose a key the process will be a bit more involved however, it can be done. The dealer will need to find the VIN number of the car and then purchase a replacement key blade and TWICE module, both with the exact unique code. After that, they'll have to cut the replacement key and then program it using an innovative software tool called MDI.
Replacement Key Fob
The key fob contains an internal battery that is used to lock and unlock your car. They have a limited life span and eventually die. This is a typical issue that happens to all cars and the good news is that you can replace the batteries in a majority of key fobs without replacing the whole case. Amazon sells fobs for replacement that already have all the electronics installed. You can simply open the case and replace the batteries. You'll need to remove the emergency key before you replace the batteries. To do this, place the screwdriver of a small flat head into the slot in the middle of the. Move the screwdriver around the case, and it will split open, making it much easier to remove.
When you are ready to replace the keys, ensure you have a spare as this can reduce the total cost by a significant amount. If you have an extra key, request the dealer to cut the key and program it for your car. This is much cheaper than purchasing a brand new key fob.
It is possible to add another key to your vehicle If you don't already have one, but it requires lots of research and work. The cost for adding a second key is about a few hundred dollars and it also requires the programming of the car's computer. This can be done by a professional, however it's an expensive option for the majority of owners.
Replacement Ignition
The new SAAB 9-3 features an advanced alarm system that is based on a key code. If you lose only one key, it could be costly to replace it with another one since the car must have a special computer added and be programmed to accept a new key. The majority of locksmiths aren't able to do this, and even dealers will charge hundred dollars just to program the new key!
Dealers will charge you a high price to replace your car's computer (also called the CIM or SAAB twice) when you lose the only working key. Instead, we can reprogram the EEPROM in your current car computer to allow it to be programmed for an additional key, which will save you more than 50% of what you'll be charged at a dealership.
If you have owned a SAAB 9-3 for many years, you know that the ignition keys aren't very durable. They can become incredibly sticky and the buttons are known to be removed from them at times and you should think about getting a replacement if yours isn't functioning properly. It's good to know that replacing the ignition key isn't as complicated as it sounds and is fairly easy to do using the appropriate tools.